| RealView® Logic Modules provide uncommitted FPGAs connected to the AMBATM system bus. They use the same form factor and connector layout as Core Modules and are designed to plug onto a platform
board or Core Module allowing users to prototype, test and integrate ARM PrimeCell® Peripherals or their own HDL hardware IP.
|
Front Back
|
Logic Modules can run standalone but it is likely that for most applications they will be plugged onto a platform baseboard
or Core Module. Up to 3 Logic Modules can be stacked on top of a Core Module.
LM-EP20K1000E uses the Altera Apex EP20K1000E FPGA which contains about 38k logic elements, where one logic element is a register
and 4 input look-up-table. Please note that a RealView Multi-ICE run control unit is required to program the FPGA configuration memory on this board.
Logic Module for Altera EP20K1000E Key Features
- Altera EP20K1000E FPGA
- 1MB ZBT SRAM
- 9 General-purpose LEDs
- 8 General-purpose switches
- Clock generators
- Push button for reset or interrupt generation
- FPGA programming via RealView Multi-ICE (JTAG) or FPGA manufacturers' tools
- Prototyping area connected to FPGA
- Connector for Interface Modules
- Full connection to Integrator AMBA system and control buses including all interrupt, arbiter and clock signals
- Example AMBA HDL code provided in VHDL and Verilog
- A 32-bit connector for a logic analyzer (connected directly to FPGA pins)
- A Trace port analyzer connector for prototyping ARM cores
Please Note
Logic Modules have been withdrawn from sale.
Discover more by downloading the following PDF RealView Hardware Product Obsolescence (68Kb .pdf).
