Computer Org/Architecture Development Boards for Researchers

The ARM University Program recommends the following development boards for research on Computer Org/Architecture:

ARM Processors meet Hardware Programmability
Zynq™-7000 All Programmable SoC is a new class of platform which combines an industry-standard ARM® dual-core Cortex™-A9 MPCore™ processing system with Xilinx 28nm programmable logic. This processor-centric architecture delivers a comprehensive processing platform that offers academics ASIC levels of performance and power consumption, the ease of programmability of a microprocessor and the flexibility of a FPGA.

More than Silicon: A Comprehensive Platform Offering
The value of Zynq-7000 All Programmable SoC is amplified by all the elements supporting the Zynq-7000 family that includes hardware (HW) and software (SW) development tools, operating systems, and much more.

A Flexible Scalable Platform Addressing a Wide Range of Applications
The flexible nature of programmable logic and its tight integration to the ARM based processing system offers academics the possibility to add virtually any peripheral they want and create accelerators to extend the performance of the Zynq-7000 devices. This makes Zynq-7000 devices the ideal solution for a variety of academic projects.

Freescale delivers a cost-effective, easy-to-use platform designed to simplify product evaluation and speed time to market with its new Quick Start development board series based on the i.MX family of multimedia applications processors.

The first in the series, the i.MX53 Quick Start board is a low-cost open source development platform. Integrated with an ARM® CortexTM™-A8 1 GHz processor, the Quick Start board includes a display controller, hardware-accelerated graphics, 1080p video decode and 720p encode as well as numerous connectivity options ideally suited for applications such as human machine interface in embedded consumer, industrial and medical markets.

Designed as a feature-rich development platform, the i.MX53 Quick Start board includes hardware design files and a board support package (BSP) containing drivers optimized for multimedia operations. This decreases time to market, provides a basic product design, and serves as a launching point for more complex designs. Additionally, the ecosystem for the board is comprised of partners who provide a variety of cost-effective debugging tools and complete development suites optimized for the Quick Start development platform.

The i.MX53 Quick Start board recieves support from Freescale and the community of i.MX developers at imxcommunity.org.

Freescale i.MX53 quick start board

The FRDM-KL25Z is an ultra-low-cost development platform enabled by Kinetis L Series KL1x and KL2x MCUs families built on ARM® Cortex™-M0+ processor. Features include easy access to MCU I/O, battery-ready, low-power operation, a standard-based form factor with expansion board options and a built-in debug interface for flash programming and run-control. The FRDM-KL25Z is supported by a range of Freescale and third-party development software.

The BeagleBone is the low-cost, high-expansion hardware-hacker focused BeagleBoard. It is a bare-bones BeagleBoard that acts as a USB or Ethernet connected expansion companion for your current BeagleBoard and BeagleBoard-xM or works stand-alone. The BeagleBone is small even by BeagleBoard standards and with the high-performance ARM capabilities you expect from a BeagleBoard, the BeagleBone brings full-featured Linux to places it has never gone before.

The PandaBoard is a low-power, low cost single-board computer based on the Texas Instruments' 1 GHz dual-core Cortex-A9 MPCore-based OMAP4430 applications processor.

The PandaBoard features a dual-core 1 GHz ARM Cortex-A9 MPCore CPU, a PowerVR SGX540 GPU, a C64x DSP, and 1 GB of DDR2 SDRAM. Primary persistent storage is via an SD Card slot allowing SDHC cards up to 32 GB to be utilized. The PandaBoard includes wired 10/100 Ethernet as well as wireless Ethernet and Bluetooth connectivity. Its size is slightly larger than the ETX/XTX Computer form factor at 4 in (100 mm) by 4.5 in (110 mm). The PandaBoard can output video signals via DVI and HDMI interfaces. It also has stereo 3.5 mm audio connectors.

PandaBoard runs the Linux kernel, with either traditional, Ubuntu, or Android user environments.



We use cookies to give you the best experience on our website. By continuing to use our site you consent to our cookies.

Change Settings

Find out more about the cookies we set