POD1 to POD8

These 38-way high density Mictor connectors are used with several types of logic analyzer, for example Agilent and Tektronix. 

The connectors on the Analyzer Module are AMP part number 2-767004-2. 

The mating part is available in several forms, these include pre-made analyser probes supplied by analyzer manufacturers, and PCB mounting parts. 

Mating parts for the Mictor connectors can be found at  http://www.amp.com/

J1 and J5

These GPIO connectors are standard 17x2 way 0.1 inch pitch headers.  They can be used to connect a 34 way IDC cable with a 0.1 inch pitch connector.

J8

These are the configuration links, and allow MCS0EN, MRDY, EBIEN and nCFGEN to be grounded with a standard 0.1 inch jumper link.

The grid of holes at the front edge of the Module are intended for customer use.  A small grid of no connect (NC) holes are surrounded by clearly marked GND and 3V3 power.