*
*Home|Chinese|Japanese*About ARM|Forums|Events|News|Employment|Contact Us|Investors*
dotted rule
*ARM - the architecture for the digital worldARM - the architecture for the digital world
search
*
*
***
*MARKETS:PRODUCTS & SOLUTIONS:CONNECTED COMMUNITY:TECHNICAL SUPPORT:DOCUMENTATION*
*
technical support
*
*
****
*.Technical Support
*
*
*>>Home Page*
*
*.Obtaining Support*
*
*.FAQs*
*
**Development Tool FAQs*
**IP FAQs*
**Embedded Software FAQs*
**Artisan Physical IP FAQs (Login Required)*
*
*.Downloads*
*
*.Documentation*
*
*.Training*
*
*.Where To Buy*
*
*.Keil MCU Tools*
*
*.What's New*
*
*.ARM Newsgroups*
*
*.Active Assist On-site Services*
*
*
*
technical support FAQsask ARM*
*

Technical Support Search
*     (Advanced Search)
  FAQs   Documentation   Downloads   Forums

*

 
downarrowMulti-ICE cannot auto-configure the Versatile/PB926EJ-S / Multi-ICE cannot load the configuration files provided in Versatile/PB926EJ-S installation CD v1.0
Applies to: Multi-ICE, PB926EJ-S, Versatile

Multi-ICE v2.2.5 or earlier cannot auto-configure the devices on the Versatile/PB926EJ-S. This happens because the auto-configuration code is not programmed to recognize the on-board XC2V2000 FPGA.

Currently, this can be overcome by loading a manual configuration file in Multi-ICE Server. Future versions or patches of Multi-ICE will include auto-configuration code for the Versatile/PB926EJ-S.

The Multi-ICE manual configuration files provided in the Versatile/PB926EJ-S installation CD v1.0 are incorrect. In order to reprogram the board you need to use the update files from the Technical Support - Downloads - Versatile page in the ARM website. 

If you are using Multi-ICE v2.2.5 or earlier you need to add manually the following lines to irlength.arm in the Multi-ICE installation folder:

PWP926EJ-S_BS2=2
XC2V2000=6

The PWP926EJ-S_BS2 is the test TAP controller for the ARM926EJ-S development chip.
The XC2V2000 is a Xilinx Virtex-II FPGA.






back to top

*
**
*4 dots*Other ARM Websites
*
shadow *LEGAL STATEMENTshadow