The BeagleBone is the low-cost, high-expansion hardware-hacker focused BeagleBoard. It is a bare-bones BeagleBoard that acts as a USB or Ethernet connected expansion companion for your current BeagleBoard and BeagleBoard-xM or works stand-alone. The BeagleBone is small even by BeagleBoard standards and with the high-performance ARM capabilities you expect from a BeagleBoard, the BeagleBone brings full-featured Linux to places it has never gone before.
The PandaBoard is a low-power, low cost single-board computer based on the Texas Instruments' 1 GHz dual-core Cortex-A9 MPCore-based OMAP4430 applications processor.
The PandaBoard features a dual-core 1 GHz ARM Cortex-A9 MPCore CPU, a PowerVR SGX540 GPU, a C64x DSP, and 1 GB of DDR2 SDRAM. Primary persistent storage is via an SD Card slot allowing SDHC cards up to 32 GB to be utilized. The PandaBoard includes wired 10/100 Ethernet as well as wireless Ethernet and Bluetooth connectivity. Its size is slightly larger than the ETX/XTX Computer form factor at 4 in (100 mm) by 4.5 in (110 mm). The PandaBoard can output video signals via DVI and HDMI interfaces. It also has stereo 3.5 mm audio connectors.
PandaBoard runs the Linux kernel, with either traditional, Ubuntu, or Android user environments.
The FRDM-KL25Z is an ultra-low-cost development platform enabled by Kinetis L Series KL1x and KL2x MCUs families built on ARM® Cortex™-M0+ processor. Features include easy access to MCU I/O, battery-ready, low-power operation, a standard-based form factor with expansion board options and a built-in debug interface for flash programming and run-control. The FRDM-KL25Z is supported by a range of Freescale and third-party development software.
The Tiva C Series LaunchPad includes everything you need to get started with ARM Cortex-M4 development!
- Tiva C Series TM4C LaunchPad Evaluation Board (EK-TM4C123GXL)
- On-board In-Circuit Debug Interface (ICDI)
- USB Micro-B plug to USB-A plug cable
- README First document
- Free TM4C123GXL TivaWare® for C Series downloads
ARM Cortex-M4 based Microcontroller
The Tiva C Series TM4C123GH6PM microcontroller offers an 80-MHz, 32-bit ARM Cortex-M4 CPU with floating point, 256 Kbytes of 100,000 write-erase cycle FLASH, and many peripherals such as MC PWMs, 1-MSPS ADCs, eight UARTs, four SPIs, four I2Cs, USB Host|Device, and up to 27 timers, some configurable up to 64 bits.
ARM Processors meet Hardware Programmability
Zynq™-7000 All Programmable SoC is a new class of platform which combines an industry-standard ARM® dual-core Cortex™-A9 MPCore™ processing system with Xilinx 28nm programmable logic. This processor-centric architecture delivers a comprehensive processing platform that offers academics ASIC levels of performance and power consumption, the ease of programmability of a microprocessor and the flexibility of a FPGA.
More than Silicon: A Comprehensive Platform Offering
The value of Zynq-7000 All Programmable SoC is amplified by all the elements supporting the Zynq-7000 family that includes hardware (HW) and software (SW) development tools, operating systems, and much more.
A Flexible Scalable Platform Addressing a Wide Range of Applications
The flexible nature of programmable logic and its tight integration to the ARM based processing system offers academics the possibility to add virtually any peripheral they want and create accelerators to extend the performance of the Zynq-7000 devices. This makes Zynq-7000 devices the ideal solution for a variety of academic projects.
- Digilent Zedboad
- Zynq-7000 All Programmable SoCs
- All Zynq Boards and Kits
- Xilinx Zynq + DS-5 Getting Connected Guide
Snowball is a low power, low cost Single Board Computer based on the ST-Ericsson Nova A9500 processor (Dual Cortex A9 + Mali 400 GPU) that targets hobbyists and professional developers wanting to prototype new embedded designs. It will help developers to create applications for Android, Meego and Ubuntu.
Features include ARM Dual Cortex A9 @ 1GHz, Mali 400 GPU, IEEE 802.11 b/g/n Wireless LAN, Bluetooth BT4.0/ BLE. (ex Antenna), GPS (Ex. Antenna), 3x Expansion Connectors (FSMC, HSI, Audio, MiPi CSI / Camera, LCD, MiPi DSI, UART, SPI, I2C, GPIO), 1GB LP-DDR2, and 4 / 8GB e-MMC.
Keil (an ARM company) offers starter kits based on the ARM Cortex-M3-based STMicroelectronics STM32F103 microcontroller. These kits include an evaluation board, a Keil ULINK-ME USB-JTAG interface, as well as the MDK-ARM evaluation software tools. For academic pricing information, please contact ARM or your local Keil distributor.