Open Frame Panel Starter Kit based on ARM926EJ-S CPU by Ronetix Development Tools GmbH

Evaluation Board/Reference Designs, etc.

Product Description

The new compact design SK-PM9G45 by RONETIX built around Atmel's 400MHz, ARM926-based AT91SAM9G45 MCU.

The Open Frame Panel PC consists of a CPU Module PM9G45, a base board and a 7” LCD 800x480 with Touch-Screen and LED Backlight. The Touch-Display is mounted on the back side of the base board, which has exactly the same dimensions as the LCD (16.5x10.4cm). The design can be used for evaluating of the CPU Module PM9G45 as well as compact panel PC. The CPU Module is equipped with a 400 MHz ARM926EJ-S CPU, 128MiB DDR2 and 256MiB NAND Flash, which allows a smoothly running of Linux (Open Embedded and Android) or WinCE.

Features at a glance:

All-purpose CPU Module PM9G45:

• AT91SAM9G45 Embedded MCU, 400MHz
• 128MiB DDR2
• 256MiB NAND flash
• DS2401 serial number chip
• DataFlash or SPI Flash (optional)
• 10/100 Mbps Ethernet PHY
Base board:
• Ethernet RJ-45
• 7” LCD with touchscreen, 800x480, 24-bit
• LED backlight
• Expansion LCD connector
• MicroSD card slot
• 4x RS232
• 1x RS232/RS485
• Expansion Header pins
• USB host on type A connector
• USB host/device on Micro-AB connector
• I2S audio codec
• Audio jacks for headphone and microphone
• Power supply 5V or 9-24V
• Reset, wake-up and two user defined buttons
• 2x user defined LEDs
• WiFi (optional)

More information can found on:

http://www.ronetix.at
http://download.ronetix.info/boards/doc/PM9G45/SK-PM9G45-datasheet.pdf.

Open Frame Panel Starter Kit based on ARM926EJ-S CPU

Market Segment(s)

• Embedded

Target Platform(s)

• Android
• Linux
• Other OS
• Windows Embedded CE

ARM Processor(s)

• ARM7EJ-S
• ARM7TDMI
• ARM7TDMI-S
• ARM920T
• ARM922T
• ARM926EJ-S
• ARM946E-S
• ARM966E-S
• Cortex-A53
• Cortex-A57
• ARMv8

 Contact Us