ARM processor-based LPC2138 Teach YourSelf Kit by RHYDO TECHNOLOGIES (P) LTD

Evaluation Board/Reference Designs, etc.

Product Description

The eDu LPC 2138 is a NXP's ARM7TDMI ( 16 & 32 bit) based LPC 2138 microcontroller self study kit, suitable for teaching and learning embedded system programming. This tutorial is intended to give a detailed picture of programming the Philips (NXP) LPC2138 ARM7 microcontroller. The tutorial kit includes all necessary tools to assist you in developing various applications your self. The Philips ARM7 Microcontroller LPC21XX series is a high-performance while low-cost embedded processor. It includes several useful modules, like I2C, RTC, PWM, UART ,ADC etc. It is quite convenient for embedded system designer to use it as an all-in-one solution.

eDu LPC2138 Package Includes
• Fully tested eCee LPC2138 Board (Part No: Dev-0307)
• Serial Cable
• USB Cable
• DVD with
User Manual
Tutorial
Datasheets
Example Programs
Development Tools (Demo Version)
Downloader Tools
Supporting Software


eCee LPC2138 Features
• Includes Base Board + Header Board
• Compact and Ready to use design
• Professional EMI/RFI Complaint PCB Layout Design for Noise Reduction
• High Quality Two layer PTH PCB

Base Board Features
• Supports LPC2129/32/48 Header Boards
• Includes LPC2138 Header Board
• No separate programmer required (On-Chip Boot loader)
• No Separate power adapter required (USB power source)
• Two RS-232 Interfaces (For direct connection to PC’s Serial port)
• On Board Two Line LCD Display (2x16) (with jumper select option)
• On Board 8 LED Interface to test Port pin (with jumper select option)
• On Board Pot interface to ADC
• On Board Temperature Sensor Interface
• On Board Buzzer Interface
• On Board 4x4 (16 Keys) Matrix Keyboard
• On Board I2C EEPROM
• On Board External Interrupt Button
• On Board Connector for PWM Output
• PWM controlled LCD backlight
• On Board Connector for Analog Output
• On Board Speaker Output
• LF Amplifier LM 386
• Adaptor (any standard 9-12V power supply) option
• On Board Power LED Indicator
• On Board Reset button
• All Port Pins available at Berge Strip
• On Board JTAG Connector for Debugging/Programming
• Power Supply Reverse Polarity Protection
• Three On Board DB9 Connectors (Two for UART and One for CAN)
• On Board USB Connector
• On Board 1 Amp Voltage Regulator
• On Board Connector for regulated 3V3 output
• On Board Connector for regulated 5V output
• Controller Area Network (CAN) transceiver (optional)
• Can be used as main board for developing applications

Header Board Features
• Easy to use DIP Package
• Includes NXP LPC 2138 Microcontroller
• On Board Power LED Indicator
• On Board JTAG Jumper
• On Board 10 MHz Crystal Oscillator
• On Board 32.768 KHz Crystal for RTC
• On Board 3.3V Regulator
• On Board Power Supply de-Coupling Capacitors
• All Port Pins available at Berge Strip
• Header Module can be removed for developing your circui

ARM processor-based LPC2138 Teach YourSelf Kit

Market Segment(s)

• Embedded

Target Platform(s)

• Other OS

ARM Processor(s)

• ARM7TDMI-S
• Cortex-A53
• Cortex-A57
• ARMv8

 Contact Us