SBC Module (AD-7011) by A&D Company, Limited

Evaluation Board/Reference Designs, etc.

Product Description

Linux Single Board Computer
Linux SBC has almost the same functions as a regular PC. Equipped with a GUI tool that makes it possible to design an LCD display on the Host PC.

* Small Size (70mm(W) x 70mm(D) x 15mm(H)) ideal for embedding
* Low power consumption (3.3V single power source, Current consumption approx. 500mA)
* Linux SBC has almost the same functions as a regular PC, including CPU, Memory, input/output LCD Drive, etc.
* The installed Real-Time Linux OS, which is an extended version of Linux, is essential for measurement and control
* It is equipped with AD-VirtualConsole, a tool to support GUI programming
* The LCD touch screen can be directly connected and the GUI environment can be easily programmed
* Development environment for control application with MATLAB/Simulink (by MathWorks) or C language
* Linux Drivers and all S-Functions of MATLAB/Simulink are supported for multiple input/output
* Processor i.MX31 Freescale
Adopt ARM1136JF-S@400MHz CPU core
Installed floating-point processor, 128KB L2 cache
* Memory; Main DDR SDRAM, NAND Flash, NOR Flash (for OS)
* OS; Linux (with Real-Time extension)
* IO;
Color LCD interface (VGA/QVGA)
Touch Panel interface
GPIO
Serial interface (1.8Mbps Max-the speed varies depending on the application and the number of channels) 5ch Max
Sound functions (Stereo line input/output, Monaural speaker output)
1 wire interface
Onboard USB interface 2ch
Ethernet interface
SD memory card interface
Max 8x8 key matrix
Camera interface (software driver support TBD)
* Development Environment
Control Appliation Development Tool (C language or MATLAB/Simulink (by Mathworks))
GUI Design Tool (AD-VirtualConsole (by A&D))

Evaluation Board (sold separately)
Model AD7011-EVA
IO;
AC adaptor input jack + power switch
100 Base-TX Ethernet RJ45 connector
USB B connector (Host)
USB mini-AB connector (On The Go)
Stereo line input mini jack
Stereo line output mini jack
SD card slot
4x4 key matrix
CPU direct input key x 4
RS-232 serial port x 1 (D-Sub9)
RS-485 serial port x 1
QVGA color TFT LCD + Touch Panel

Analog IO;
4-8ch differential voltage input, +/-2V
+/-10V Input range, 18bit ADC
4ch single-end voltage output
+/-10VDC output 16bit DAC

Software;
OS Linux 2.6 + Xenomai 2.3
BootLoader RedBoot
Compiler(for Linux, for Cygwin) gcc4.1+glibc2.4+binutils2.1
Control Application Development Tool
GUI Development Tool (AD-VirtualConsole)
Control Application Execution Environment

SBC Module (AD-7011)

Market Segment(s)

• Embedded

Target Platform(s)

• Linux

ARM Processor(s)

• ARM1136JF-S

 Contact Us