NXP 150 MHz, 32-bit ARM Cortex-M3 LPC1800 se... by NXP

Semiconductor Vendor with ARM Processor RTL license from ARM

Product Description

Fastest Cortex-M3 MCU, Largest SRAM, High Speed USB

The LPC1800 series of low power, high-performance Cortex-M3 MCUs features frequencies up to 150 MHz and flexible Dual-Bank Flash for the highest reliability in-application re-programming.

Key features
-150 MHz, 32-bit ARM Cortex-M3
-Up to 1 MB dual-bank Flash
-Up to 200 KB SRAM
-Up to 4 KB EEPROM
-Memory Protection Unit (MPU)
-Two high-speed USB 2.0 interfaces, on-chip high-speed PHY
-10/100T Ethernet MAC with MII and RMII interfaces
-LCD controller with 1024 x 768 pixel display resolution
-Innovative Quad SPI Flash Interface (SPIFI)
-State Configurable Timer (SCT) Subsystem
-Two CAN 2.0B
-AES Decryption with 128-bit secure OTP key storage
-Up to 164 GPIO
-Pin-compatible with the LPC4300 series

Additional features
-8-channel GPDMA controller
-Two 8-channel, 10-bit ADCs and one 10-bit DAC (400 K samples per second)
-Motor Control PWM and Quadrature Encoder Interface
-Four UARTs, smart card interface
-Two Fast-mode I2C, two I2S, two SSP/SPI
-Temperature range: –40 to +85 ºC

Lower power and high performance

The LPC1800 - designed using NXP’s ultra low-leakage 90 nm
process technology - is optimized for low power operation at
very low frequencies all the way through to 150 MHz maximum
performance from either Flash or RAM. This performance
provides maximum connectivity and bandwidth options for
a wide range of demanding applications including power
conversion, lighting, motor control and audio applications.

Large internal memory

The LPC1800 offers the industry’s largest on-chip SRAM for
a Cortex-M3 with up to 200 KB provided in multiple banks.
A flexible dual-bank Flash architecture offers the highest reliability in-application re-programming, and allows for non-stop Flash operation.

Extensive peripheral set

The LPC1800 also features two new innovative peripherals:
a flexible quad-SPI interface and a State Configurable Timer
subsystem. The LPC1800 is the first microcontroller to provide
a seamless high-speed interface that will connect with virtually
all SPI and quad-SPI manufacturers. The LPC1800’s State
Configurable Timer Subsystem comprises of a timer array
with a state machine enabling complex functionality including
event controlled PWM waveform generation, ADC synchronization and dead time control. This timer subsystem gives embedded designers increased flexibility to create user-defined wave-forms and control signals.