|  | NXP
| |  | | | | | LPC2400 series of ARM7-based microcontrollers
Semiconductor Vendor with ARM Processor RTL license from ARM
Product Description
NXP's LPC2400 series (the LPC2478 is the winner of the 2008 EDN Magazine Innovative Product of the Year for Microcontrollers and Cores) offers high performance and high integration ARM7™ core-based microcontrollers (MCUs) for use in real-time embedded applications, ranging from industrial control, automotive and consumer applications, as well as any embedded application that requires high performance and low power consumption in a cost-effective 32-bit MCU.
Operating at 72MHz (65 Dhrystone MIPs), the devices feature a 16/32-bit ARM7TDMI-S™ core, 96KB on-chip SRAM and up to 512KB on-chip Flash. The nearly zero wait-state Flash enhances performance by enabling the CPU to run as fast as SRAM memory, unlike competing solutions whose performance is limited due to multiple wait-state Flash.
Built for connectivity, the LPC24xx family supports 10/100 Ethernet, full-speed (12 Mbps) USB 2.0, USB OTG, and CAN 2.0B. They have an external memory interface, 10-bit A/D and D/A converters, an Internal RC oscillator, and an SD memory-card interface on two high-speed buses to eliminate communication bandwidth bottlenecks. The LPC247x adds a Color LCD controller.
Key Features
* 72-MHz, 32-bit ARM7TDMI-S with dual AHB buses
* 512 KB of ISP/IAP Flash and 98 KB of SRAM
* External memory interface for SDRAM, SRAM, and Flash
* 10/100 Ethernet MAC with DMA and MII/RMII interface
* USB 2.0 full-speed OTG/Device/ OHCI plus PHY and DMA
* Two CAN 2.0B controllers with acceptance filtering
* General-purpose DMA controller
* 10-bit A/D converter and 10-bit D/A converter
* XGA LCD controller with dedicated DMA for TFT and STN panels (LPC247x only)
* Multiple serial interfaces: three I2C, one I2S, four UARTs, three SPI/SSP
* Two PWM units
* Four 32-bit timers, a low-power Real-Time Clock, and a Watchdog timer
* 4-MHz internal RC (IRC) oscillator trimmed to 1% accuracy
* 160 general-purpose Fast I/O pins
* Single 3.3-V power supply
* Boundary scan
* Packages:
– LQFP208 (28 x 28 x 1.4 mm)
– TFBGA208 (15 x 15 x .08 mm)
– TFBGA180 (12 x 12 x 0.8 mm)
http://www.standardics.nxp.com/products/lpc2000/lpc24xx/
Market Segment(s)- Embedded
- Enterprise
- Home
- Mobile
- Emerging Applications
Companion Processor(s)
ARM Processor(s)
System IP- AMBA
- Primecell Peripherals
Physical IP- Analog / Mixed Signal (PLLs, ADC/DAC)
- General Purpose I/O (Inline / Staggered)
- Standard Cell Libraries
contact us
| |
| |
|
